THS4031CDGNRG4 Overview
It is packaged in an SOP-case that protects the operational amplifiers from damage. An op amp of this type is a OPERATIONAL AMPLIFIER-type. As far as the packaging is concerned, buffer op amp is delivered in a Tape & Reel case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 15V battery and that the battery should be inserted in the amplifier. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 500μV for input offset voltage. A supply current of 8.5mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 95dB. There are a total of 1 channels available on the op amps. This instrumentation amplifier cannot operate below 0°C degrees Celsius. You should only use op amp buffer at temperatures that are no higher than 70°C. An buffer amplifier is packed in a TAPE AND REEL-shape according to the design. It is important to keep in mind that the power supply voltage of this electric component is below 32V, which is suitable. Keeping the linear amplifier's supply voltage above 9V is recommended. In order to conduct this part, you will need to provide dual supply voltages of 16V volts.
THS4031CDGNRG4 Features
8 Pins
supply voltage of 15V
95dB voltage gain
THS4031CDGNRG4 Applications
There are a lot of Texas Instruments
THS4031CDGNRG4 Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
