THS3201DGKRG4 Overview
Packaged in a MSOP case, the buffer op amp is ready to use. The op amp is delivered to you in a Tape & Reel (TR) case. There is a growing number of terminations approaching the number of 8. The pins on this board total to 8 in total. A total of 8 pins are present on the instrumentation amplifier. There is an input offset voltage of 700μV for this buffer op amp. As long as the supply current of the chip does not exceed 14mA, this op amp ic can operate. As far as the device is concerned, buffer amplifier has 1 channels. For the buffer op amp to operate properly, it must be above the temperature of -40°C degrees Celsius. No temperature greater than 85°C should be used. In terms of the supply voltage, this electrical part is capable of operating at low voltage levels of under 15V. A high supply voltage of more than 6.6V is recommended for the instrumentation amplifier's supply voltage. As a rule of thumb, you should conduct this electronic part under a dual voltage supply of 7.5V volts. In this case, VIDEO AMPLIFIER can be used to sort the part by the type of consumer IC in the electric part.
THS3201DGKRG4 Features
8 Pins
THS3201DGKRG4 Applications
There are a lot of Texas Instruments
THS3201DGKRG4 Instrumentational OP Amps applications.
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
