THS3115CDG4 Overview
The linear amplifier is packaged in a D case which makes it easy for the consumer to handle. It comes in a Rail/Tube case, which protects instrumentation amplifier from damage during delivery. There have been a total of 14 terminations over the past year. In this case, there are 14 pins on the board. 14 pins are available on the instrumentation amplifier. With regard to input offset voltage, instrumentation amplifier is rated at 3mV. You can run this op amp ic on 4.9mA . Instrumentation amplifier has 1 channels on it. Using this buffer op amp requires a temperature of at least 0°C. It is recommended that op amp be used at temperatures below 70°C. It is possible to count 2 elements on this buffer amplifier. With regard tp supply voltage, op amp is used under 30V. The linear amplifier's supply voltage should be higher than 10V. There should be a dual supply voltage of 15V for you to conduct this electrical part. As an extra benefit of this operational amplifier ic, please refer to ALSO OPERATES WITH 10 TO 30V SINGLE SUPPLY.
THS3115CDG4 Features
14 Pins
THS3115CDG4 Applications
There are a lot of Texas Instruments
THS3115CDG4 Instrumentational OP Amps applications.
- Proportional operation circuits
- Inverse/same-phase proportional circuit
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
