TDC7200PWR Overview
Sensor and detector interface is packaged wSensor and detector interfaceh materials from Tape & Reel (TR).There is a 14-TSSOP (0.173, 4.40mm Width) package that is used in order to conserve space.This type of Time to Flight to Digital Converter is capable of providing superior performance.As a mounting method, Surface Mount is employed.A temperature of -40°C~85°C should be maintained during operation to avoid unnecessary cooling.Ultrasound is used as its input type.The 14 termination prevents signals from reflecting off the transmission line's end.According to its base part number of TDC7200, related electronic parts are available.The system is configured with 1 functions.As long as the supply voltage is 3.3V, it will operate.Essentially, it is a 14-pin electronic device.Sensor and detector interface is mounted in the way of Surface Mount.As an output type, Digital is used.With a supply current of 1.35mA, it is permitted to be used.Designed using advanced techniques, this electronic device falls into the category of Other Analog ICs.There is a minimum supply voltage of 2V.Sensor and detector interface is optimized for operating at the power supplies of 3.3V.3.6V is the maximum supply voltage.The 1 channel is designed to transmit data.
TDC7200PWR Features
With 3.3V channels
consumer IC type: 2V
TDC7200PWR Applications
There are a lot of Texas Instruments TDC7200PWR applications of sensor and detector interfaces.
- Automatic Lighting (Residential and Commercial)
- Analog Signal Processing With Filter Characteristics
- Collision-Avoidance for Drones, Robots and
- Large Tank Level Sensing
- Simple bus-controlled part for remote control and
- System power consumption
- Seatbelt Buckles
- Vehicle Speed VRS Interfaces
- Seat Movers
- Photovoltaic systems
