SNJ54LS674J Overview
CDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 24. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 24. It is recommended that the mount should be done by Through Hole. There is an electronic component in the LS. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: HOLD MODE; READ/WRITE CONTROL; CHIP SELECT DISABLES BOTH SERIAL & PARALLEL OPERATIONS. A total of 16 bits are present on the IC chip. It has a total of zero pins. At temperatures below 125°C, it is recommended for use. Ideally, it should not fall below -55°C. A voltage of 5.5V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.5V. In order to package the part properly, TUBE is used.
SNJ54LS674J Features
With 24 pins
Operate supply voltage at 5V
Packing Method : TUBE
SNJ54LS674J Applications
There are a lot of Texas Instruments
SNJ54LS674J Shift Registers applications.
- Data Processors
- Pseudo Random Pattern Generator
- Pulse Extenders
- Pattern Recognizers
- Interconnectors
- Counter
- Data manipulation
- Delay Line
- Generate time delay toward digital circuits
- Parallel data
