SNJ54HC595J Overview
This device can be found embedded within the package CDIP. A total of 16 terminations can be found on the chip. This part has an operating supply voltage of 5V. A total of 1 elements are present on this part. 16 pins are present on the device. It is recommended to mount by Through Hole in order to get the best results. In this case, the electronic component belongs to the HC/UH. It is noted that the operating supply voltage of this chip falls within the range 5V. Additionally, please note the following: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. A total of 8 bits are present on an IC chip. In total, there are 16 pins on it. It should be used below 125°C. In order for this device to function, the value should not be less than -55°C. 6V is the supply voltage used. It is important to note that this supply voltage is higher than 2V. There is a TUBE packaging for the part.
SNJ54HC595J Features
With 16 pins
Operate supply voltage at 5V
Packing Method : TUBE
SNJ54HC595J Applications
There are a lot of Texas Instruments
SNJ54HC595J Shift Registers applications.
- Data Format Converters
- Data Processors
- Pseudo Random Pattern Generator
- Pulse Extenders
- Pattern Recognizers
- Interconnectors
- Counter
- Data manipulation
- Delay Line
- Generate time delay toward digital circuits
