SNJ54AHC123AJ Overview
In the packaging, the clock timer is enclosed with the CDIP code on the back. It is used to pack in Rail/Tube case. The minimum operating temperature of the chip must not be lower than -55°C. It's best to use the timer clock when the temperature is below 125°C. The timer clock contains 16 pins. The supply voltage of the programmable timer can rate 3.3V. You can read the timer clock's additional feature in the follwing: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS. The sum of the IC chip pins is 16 . The number of the chip's terminations sums up to 16. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 5.5V. The timer clock runs quiescent current at 4μA.
SNJ54AHC123AJ Features
Package / Case: Rail/Tube
Max Operating temperature at -55°C
Additional Feature: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS
Quiescent Current at 4μA
SNJ54AHC123AJ Applications
There are a lot of Texas Instruments
SNJ54AHC123AJ Programmable Timers & Oscillators applications.
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
- Car Door Handle circuit
- Smart Key
- Remote current sensor
- Intruder Detection
- Power-On Reset Timer
