Name: SN75LBC784DWR
Brand: Texas Instruments
SKU: SN75LBC784DWR
Price: 1.54000 USD
Availability: InStock

new-10%

SN75LBC784DWR

Manufacturer part number:SN75LBC784DWR

Manufacturer:Texas Instruments

Description:28 Terminations28 Pin 75LBC784 Receivers4 Bits 4/4 Drivers/Receivers4 Functions

Case Package:SOT-23

Datasheet:SN75LBC784DWR Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	28-SOIC (0.295, 7.50mm Width)
Number of Pins	28
Operating Temperature	0°C~70°C
Packaging	Cut Tape (CT)
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Type	Transceiver
HTS Code	8542.39.00.01
Technology	BICMOS
Voltage - Supply	10.8V~13.2V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	12V
Terminal Pitch	1.27mm
Reach Compliance Code	unknown
[email protected] Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	75LBC784
Pin Count	28
Qualification Status	Not Qualified
Power Supplies	+-12V
Supply Current-Max	12mA
Logic Function	Receiver
Data Rate	120 kbps
Output Characteristics	TOTEM-POLE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS423
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	4/4
Driver Number of Bits	4
Receiver Number of Bits	4
Duplex	Full
Receiver Hysteresis	40mV
Interface Standard	EIA-232; EIA-423-B
Receive Delay-Max	1000 ns
Negative Supply Voltage-Nom	-12V
Transmit Delay-Max	2700 ns
Output Low Current-Max	0.004A
Out Swing-Min	8 V
High Level Input Current-Max	0.0001A
Height Seated (Max)	2.65mm
Length	17.9mm
Width	7.5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

SN75LBC784DWR Product Details

SN75LBC784DWR Overview

LED drivers with the enhanced 28-SOIC (0.295, 7.50mm Width) package will be able to drive a variety of common LEDs with ease.Cut Tape (CT) package is used for this receiver.The Transceiver can transceiver type enables this part to be used in a wide range of applications.This wide receiver can be placed on any Surface Mount-type PCB or development board.This differential driver consumes 10.8V~13.2V for its power supplyAt any given time, there can be up to 4/4 eligible receivers/drivers for this electronic part.IC receiver's like this are designed for applications requiring a 0°C~70°C operating temperature.With a supply voltage range of 12V, this line driver ic operates efficiently.The integrated terminations of this wide receiver allow it to drive and receive signals from data.Transceiver comes with 28 standard pinouts that meet the market's requirements.The base part number 75LBC784 identifies the product type, temperature, package, etc., so you can search for more variants by using it.An enhanced power dissipation control driver IC featuring 28 pins.Its package size is drastically reduced by downsizing ICs and utilizing high-density Surface Mount mounting techniques.It provided a 4-bit resolution capability with this ic receiver.It is typical for this receiver to have a resolution of 4 bits when it is specified.The driver IC in this product is designed so that it can be powered by +-12V.It is recommended that enough current be supplied to the VCC pin of the ic receiver, but not more than 12mA.Operating temperatures of line driver ic should be kept above -12V at all times.