Name: SN75C1406D
Brand: Texas Instruments
SKU: SN75C1406D
Price: 2.68000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Type	Transceiver
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Line Driver or Receivers
Technology	BIMOS
Voltage - Supply	4.5V~15V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	3
Supply Voltage	5V
Base Part Number	75C1406
Pin Count	16
Output Voltage	6V
Operating Supply Voltage	5V
Nominal Supply Current	250μA
Output Current	12mA
Logic Function	Receiver, Transceiver
Data Rate	120 kbps
Output Characteristics	TOTEM-POLE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	SCHMITT TRIGGER
Number of Drivers/Receivers	3/3
Driver Number of Bits	3
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	5V
Duplex	Full
Receiver Hysteresis	1V
Number of Transceivers	1
Receive Delay-Max	4000 ns
Negative Supply Voltage-Nom	-12V
Simplex/Duplex	Full Duplex
Supply Voltage1-Nom	12V
Number of Receivers	3
Out Swing-Min	8 V
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN75C1406D Product Details

SN75C1406D Overview

This driver chip is excellent for driving common LEDs due to its enhanced 16-SOIC (0.154, 3.90mm Width) package.The package of this receiver is Tube.As a Transceiver can transceiver, this part has enabled many applications to be served.You can place this wide receiver to any Surface Mount-type PCB or development board.With respect to the power supply, this differential driver uses 4.5V~15V.It is possible to have up to 3/3 receivers/drivers in use simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at 0°C~70°C.Driver ICs with a supply voltage range of 5V can operate efficiently.This integrated circuit has 16 terminations designed for driving and receiving signals from data.There are 16 pinouts available on this transceiver which are market standard.This part number 75C1406 can be used to search for more variants based on the product type, temperature, package, etc.This is a 16-pin driver IC with enhanced power dissipation control.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.It is important to note that this ic receiver had a maximum resolution of 3 bits.An input voltage supply of 5V is required to operate the transceiver module.Line Driver or Receivers is a subcategory of this rf transceiver module.There are 1 transceivers in total that this module isolated transceiver implements.In module isolated transceiver are 3 receivers.It is advisable to maintain a line driver ic's operating temperature above -12V during operation.There is a capabilWide receivery to deliver voltage at 6V wWide receiverh this device.In this bluetooth transceiver, we are able to get a maximum output current of 12mA.If you are considering to use a power supply for this can transceiver, you'd better choose one with a 4.5V output voltage since the can transceiver operates with dual supply voltages.