Name: SN75155D
Brand: Texas Instruments
SKU: SN75155D
Price: 1.97000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 3 days ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	72.603129mg
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Termination	SMD/SMT
ECCN Code	EAR99
Type	Transceiver
Additional Feature	RESPONSE CONTROL; BUILT IN 5V REGULATOR
Subcategory	Line Driver or Receivers
Technology	BIPOLAR
Voltage - Supply	4.5V~15V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	12V
Base Part Number	SN75155
Pin Count	8
Operating Supply Voltage	12V
Number of Channels	2
Interface	RS-232
Nominal Supply Current	9.1mA
Max Supply Current	9.1mA
Logic Function	NOT, Receiver, Transceiver
Data Rate	120 kbps
Output Characteristics	TOTEM-POLE
Differential Output	NO
Output Polarity	INVERTED
Protocol	RS232
Input Characteristics	SCHMITT TRIGGER
Max Dual Supply Voltage	15V
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Min Dual Supply Voltage	4.5V
Dual Supply Voltage	12V
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	600mV
Number of Transceivers	1
ESD Protection	No
Negative Supply Voltage-Nom	-12V
Simplex/Duplex	Full Duplex
Supply Voltage1-Nom	12V
Out Swing-Min	6.4 V
High Level Input Current-Max	0.000005A
Height	1.75mm
Length	4.9mm
Width	3.91mm
Thickness	1.58mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN75155D Product Details

SN75155D Overview

This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.This receiver is mounted in the Tube package.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.You can place this wide receiver to any Surface Mount-type PCB or development board.This differential driver uses 4.5V~15V for power supply.Up to 1/1 receivers/drivers can be installed simultaneously on this electronic part.IC receiver is designed for applications with a temperature of 0°C~70°C.An output voltage range of 12V is sufficient to run this line driver ic efficiently.In this wide receiver, 8 terminations are integrated for driving and receiving signals from data.The transceiver is packaged with 8 market standard pinouts so that it can be easily used.Since the base part number SN75155 describes the product type, temperature, package, etc., you might get more options by searching with it.8-pin driver chip with enhanced power dissipation.As a result of optical transceiver downsizing and high-density Surface Mount mounting technologies, its package size has been greatly reduced.In this ic receiver, the resolution was able to be set to a maximum of 1 bits.As a rule of thumb, this receiver is typically specified with a resolution of 1 bits.This transceiver module is designed to operate from an input voltage supply of 12V.There is a subcategory named Line Driver or Receivers for this rf transceiver module.ICs implement a total of 1 transceivers.The RESPONSE CONTROL; BUILT IN 5V REGULATOR function of this optical transceiver module improves the overall stability and accuracy of signal management.A malfunction could occur when the input current exceeds 9.1mA.A temperature above -12V is recommended for the operation of the line driver ic.This optical transceiver consists of a total of 2 channels embedded in it.A 15V maximum dual supply voltage arrangement is provided as part of this integrated circuit.This can transceiver handles dual supply voltage, so make sure you choose a power supply that can output 4.5V.