SN74S373DWR Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. Tape & Reel (TR) is the way it is packaged. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. The supply voltage of the device is 4.75V~5.25V. There is 0°C~70°C operating temperature. The 74S series contains FPGAs of this type. The electronic part in this image has 8 bits. As far as this device is concerned, it has no terminations. It belongs to 74S373 family. With the supply voltage set at 5V, it is able to operate. It has 20 pins that makes it easy to use. In terms of electronic devices, this one is in the S family. It is designed with 20 pins. A Surface Mount mounting method has been used for this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. 5.25V is the maximum supply voltage (Vsup). A total of 5V power supplies are required for it to operate. If the supply voltage (Vsup) is greater than 4.75V, then the device is working correctly. Based on its reliable performance, this device is well suited to TAPE AND REEL. Input lines are generated as binary equivalents by 8 output lines. The low level output current is set to 32mA. There is -6.5mA high level output current set.
SN74S373DWR Features
20-SOIC (0.295, 7.50mm Width) package
74S series
8 Bits
74S373 family
20 pin count
20 pins
5V power supplies
SN74S373DWR Applications
There are a lot of Texas Instruments SN74S373DWR Latches applications.
- Multistage ripple counting
- Automotive Infotainment
- Shift left with parallel loading
- Data acquisition
- Communication systems
- Parallel Output
- Parallel data storage
- Frequency
- Timers
- Automotive ADAS
