SN74LVTH573PWG4 Overview
Package 20-TSSOP (0.173, 4.40mm Width) includes it. A package of Tube has been used. It is configured with an output of Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The way in which this electronic part is mounted is Surface Mount. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. This FPGA is part of the 74LVTH series. 8 Bits are used in the design of this electronic part. In this device, there are 20 terminations that have been designed. The family 74LVTH573 includes it. The supply voltage of the device is 3.3V. With 20 pins, it is equipped. In the world of electronics, this electronic device belongs to the family of LVT. With the design of the board, there are only 20 pins. Surface Mount is the way in which this electronic part is mounted. In this device, there is a total of 2 ports available for use. It belongs to the subcategory of FF/Latches. There is a maximum voltage supply (Vsup) that reaches 3.6V. It is recommended that the supply voltage (Vsup) be greater than 2.7V. The 64mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 3.3V. There are 8 output lines that correspond to the binary equivalents of the input line. There are 1 elements in it. In order to operate properly, its maximum power current (ICC) should be 5mA.
SN74LVTH573PWG4 Features
20-TSSOP (0.173, 4.40mm Width) package
74LVTH series
8 Bits
74LVTH573 family
20 pin count
20 pins
1 elements
SN74LVTH573PWG4 Applications
There are a lot of Texas Instruments SN74LVTH573PWG4 Latches applications.
- Shift left register
- Stacked or Push-Down Registers
- Buffer register
- Parallel data storage
- Multistage ripple counting
- Communication systems
- Parallel-to-Serial Data Conversion
- Counter timers
- High-speed logic
- Programmable binary
