SN74LVTH162374KR Overview
The flip flop is packaged in 56-VFBGA. The package Cut Tape (CT)contains it. As configured, the output uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 2.7V~3.6Vvolts. In this case, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74LVTHseries of FPGAs. You should not exceed 160MHzin the output frequency of the device. D latch consists of 2 elements. During its operation, it consumes 190μA quiescent energy. A total of 56terminations have been recorded. The 74LVTH162374 family contains it. Power is provided by a 3.3V supply. Its input capacitance is 3pF farads. An electronic device belonging to the family LVTcan be found here. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 56. Its clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 16bits has been designed. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. This D flip flop is equipped with 0 ports. It is recommended that the supply voltage be kept at 3.3Vto maximize efficiency. The JK flip flop is with 3 output lines to operate. It has 1lines.
SN74LVTH162374KR Features
Cut Tape (CT) package
74LVTH series
56 pins
16 Bits
SN74LVTH162374KR Applications
There are a lot of Texas Instruments SN74LVTH162374KR Flip Flops applications.
- Data storage
- Count Modes
- Cold spare funcion
- Divide a clock signal by 2 or 4
- Bounce elimination switch
- High Performance Logic for test systems
- Consumer
- Digital electronics systems
- Reduced system switching noise
- Frequency division
