SN74LVC821ADGVR Overview
The flip flop is packaged in 24-TFSOP (0.173, 4.40mm Width). It is included in the package Cut Tape (CT). There is a Tri-State, Non-Invertedoutput configured with it. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 1.65V~3.6V volts, it operates. A temperature of -40°C~85°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as D-Type. It is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 150MHz Hz. D latch consists of 1 elements. As a result, it consumes 10μA of quiescent current without being affected by external factors. Currently, there are 24 terminations. Members of the 74LVC821family make up this object. The power supply voltage is 1.8V. This JK flip flop has a 5pFfarad input capacitance. An electronic device belonging to the family LVC/LCX/Zcan be found here. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 24 pins. There is a clock edge trigger type of Positive Edgeon this device. This device is part of the FF/Latchesbase part number family. To achieve this superior flexibility, 8 circuits are used. This D flip flop is well suited for TR based on its reliable performance. The D flip flop has no ports embedded. This T flip flop features a maximum design flexibility due to its output current of 24mA. It operates with 3 output lines.
SN74LVC821ADGVR Features
Cut Tape (CT) package
74LVC series
24 pins
SN74LVC821ADGVR Applications
There are a lot of Texas Instruments SN74LVC821ADGVR Flip Flops applications.
- Communications
- High Performance Logic for test systems
- Patented noise
- Data Synchronizers
- Asynchronous counter
- Frequency division
- Control circuits
- Storage Registers
- Buffered Clock
- Frequency Dividers
