SN74LVC373AN Overview
In the 20-DIP (0.300, 7.62mm) package, it can be found as an embedded module. The package is in the form of Tube. There is a Tri-State output configured. The Logic type of this electrical device is D-Type Transparent Latch. The electronic component is mounted according to the Through Hole method. There is no supply voltage for this device. The temperature at which the machine is operating is -40°C~85°C. 74LVC is the series number of this FPGA. With this electronic part, there are 8 bits. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74LVC373. In order to operate it, the supply voltage must be 1.8V. There are 20 pins on it. It is part of the family of electronic devices called LVC/LCX/Z. The pin configuration of the device is 20. The electronic part is mounted in a way that corresponds to Through Hole. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. It reaches 3.6V when the supply voltage (Vsup) reaches maximum. There are 3.3V power supplies required for this machine to operate. It consists of 2 input lines from which an electronic circuit can be built. As the output current is 24mA, the design flexibility is maximum.
SN74LVC373AN Features
20-DIP (0.300, 7.62mm) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373AN Applications
There are a lot of Texas Instruments SN74LVC373AN Latches applications.
- Counter control
- BCD counting
- Serial Input
- Lamp and Display (LED)
- Automotive ADAS
- Decade counting 7-segment decimal display
- Parallel data storage
- General-Purpose Register
- Flip-flops
- Buffer/Storage Registers
