SN74LVC373AMDBREP Overview
In the package 20-SSOP (0.209, 5.30mm Width), it can be found. The package is in the form of Tape & Reel (TR). It is configured with an output of Tri-State. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. A 1.65V~3.6V voltage supply is required for operation. There is a temperature of -55°C~125°C at which the system operates. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74LVC373. The device works with a voltage of 2.7V for its supply voltage. The 20 pind are equipped with it. It is a member of the LVC/LCX/Z family of electronic devices. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part is included in FF/Latches. When Vsup reaches 3.6V, the maximal supply voltage is reached. A total of 3.3V power supplies are needed to run it. It is recommended that the supply voltage (Vsup) be greater than 2V. There are electronic circuits attached to the 8 input lines. On the basis of its reliability, this device is well suited for TR. As the output current is 24mA, the design flexibility is maximum.
SN74LVC373AMDBREP Features
20-SSOP (0.209, 5.30mm Width) package
74LVC series
8 Bits
74LVC373 family
20 pin count
20 pins
3.3V power supplies
SN74LVC373AMDBREP Applications
There are a lot of Texas Instruments SN74LVC373AMDBREP Latches applications.
- Hammer
- Data acquisition
- Frequency dividing
- Lamp and Display (LED)
- Double bus register system
- Meter applications
- Up-Down Johnson
- Shift left with parallel loading
- High-speed logic
- Registers
