SN74LVC2G66DCUR Overview
Packed in 8-VFSOP (0.091, 2.30mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Cut Tape (CT) is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~85°C TA. There are 8 terminations totally. By its 2 channels, the electronic component provides high-quality output. With a 2.3V voltage supply, the electrical component should be turned on and run. 8 pins are injected to the electronic part body. These analog multiplexers are built based on SPST - NO switching circuits. If you are looking for variants of the digital switch, trying search with 74LVC2G66. This digital multiplexer has 10Ohm internal resistance. Please refer to the datasheets for 8 pins functions. This switch device is a typical Multiplexers or Switches. In a normalsituation, users should not supply the switches with voltage higher than 5.5V. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.65V. 10μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~5.5V. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. This switch operates within the bandwidth of 195MHz. This electronic component presents a Drain to Source resistance of 12.5Ohm.
SN74LVC2G66DCUR Features
2 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz
Bandwidth: 195MHz
Drain-to-Source resistance: 12.5Ohm
SN74LVC2G66DCUR Applications
There are a lot of Texas Instruments
SN74LVC2G66DCUR Analog Switches & Multiplexers ICs applications.
- High-Voltage
- Transmit
- Low-Voltage
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
