SN74LVC1G374DBVR Overview
The item is packaged in SOT-23-6cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 74LVCseries comprises this type of FPGA. Its output frequency should not exceed 175MHz Hz. There have been 6 terminations. Members of the 74LVC1G374family make up this object. It is powered by a voltage of 1.8V . This JK flip flop has a 3pFfarad input capacitance. An electronic device belonging to the family LVC/LCX/Zcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. 6pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 1bits is used in this application. As soon as 5.5Vis reached, Vsup reaches its maximum value. The superior flexibility is achieved through the use of 1 circuits. Due to its reliability, this T flip flop is well suited for TR. A total of 3.3V power supplies are needed to run it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Quiescent current is consumed by the D latch in the amount of 10μA.
SN74LVC1G374DBVR Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
SN74LVC1G374DBVR Applications
There are a lot of Texas Instruments SN74LVC1G374DBVR Flip Flops applications.
- Asynchronous counter
- Pattern generators
- Shift registers
- Memory
- Convert a momentary switch to a toggle switch
- Storage registers
- ESD protection
- Event Detectors
- QML qualified product
- Consumer
