SN74LVC1G175DBVT Overview
It is packaged in the way of SOT-23-6. As part of the package Tape & Reel (TR), it is embedded. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. A 1.65V~5.5Vsupply voltage is required for it to operate. A temperature of -40°C~125°C TAis used in the operation. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74LVC series. You should not exceed 175MHzin its output frequency. There is a consumption of 10μAof quiescent energy. There have been 6 terminations. This D latch belongs to the family of 74LVC1G175. It is powered by a voltage of 1.8V . A JK flip flop with a 3pFfarad input capacitance is used here. The electronic device belongs to the LVC/LCX/Zfamily. The electronic part is mounted in the way of Surface Mount. A total of 6pins are provided on this board. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 1. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. Due to its superior flexibility, it uses 1 circuits. Considering its reliability, this T flip flop is well suited for TR. A power supply of 3.3Vis required to operate it. As a result of its output current of 32mA, it is very flexible in terms of design.
SN74LVC1G175DBVT Features
Tape & Reel (TR) package
74LVC series
6 pins
1 Bits
3.3V power supplies
SN74LVC1G175DBVT Applications
There are a lot of Texas Instruments SN74LVC1G175DBVT Flip Flops applications.
- Computers
- Cold spare funcion
- QML qualified product
- Computing
- Test & Measurement
- Latch-up performance
- Load Control
- Frequency Dividers
- Storage registers
- Frequency division
