SN74LVC157ADBRG4 Overview
Providing this information in the SSOP enables digital switch board space to be saved.The package is in the form of Tape & Reel (TR).There is a design for terminating 16 as part of its basic configuration.The multiplexer's system works with 1.8V voltage.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.In the LVC/LCX/Z family, the logic switch is included.Normally, 3.3V is powered by a battery.In this multiplexer, there is a total of 8 inputs.TAPE AND REEL is used to package the switches.To accept voltage levels, the multiplexers have2 input lines.A signal source is provided by 1 output lines.A total of 4 channels are used for transmission in the turn signal switch's circuit.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 3.6V maximum supply voltage.A minimum supply voltage of 1.65V is specified for the digital swith by its applicable specification.
SN74LVC157ADBRG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
1 output lines
SN74LVC157ADBRG4 Applications
There are a lot of Texas Instruments
SN74LVC157ADBRG4 Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Frequency multiplexing system
- A/D converters
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
