SN74LV4040ARGYR Overview
The device is packaged in the 16-VFQFN Exposed Padtype. This configuration uses 16terminations. By supplying 2.5Vwith a voltage of 2.5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 16. There is a package in the form of Cut Tape (CT). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74LVseries, it has a wide range of applications. Logic type Binary Counter is adopted. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 12bits for each element. Based on the Pbfree code, the result may be yes. Further related parts may be found under the base part number 74LV4040. For its packaging, TRis employed. From the voltage source, there is a voltage of 3.3V volts. As low as 2V Vsup is the minimum supply voltage. The frequency of the system is 185MHz. It is possible to provide a voltage up to 5.5V (Vsup).
SN74LV4040ARGYR Features
Embedded in the 16-VFQFN Exposed Pad package
12 bits per element
Frequency of 185MHz
SN74LV4040ARGYR Applications
There are a lot of Texas Instruments
SN74LV4040ARGYR Counters & Dividers applications.
- Analog multiplexing and demultiplexing
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
