SN74LV175ADR Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~5.5V. -40°C~85°C TAis the operating temperature. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74LVseries of FPGAs. There should be no greater frequency than 165MHzon its output. A total of 1elements are present in it. The number of terminations is 16. If you search by 74LV175, you will find similar parts. A voltage of 2.5V is used to power it. Its input capacitance is 1.4pFfarads. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. There is an electronic component mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device has Positive Edgeas its clock edge trigger type. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 4bits. It reaches the maximum supply voltage (Vsup) at 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. 4 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 3.3V volts is applied to it. In addition to its maximum design flexibility, the output current of the T flip flop is 12mA. It operates with 2 output lines. In terms of quiescent current, it consumes 20μA .
SN74LV175ADR Features
Tape & Reel (TR) package
74LV series
16 pins
4 Bits
3.3V power supplies
SN74LV175ADR Applications
There are a lot of Texas Instruments SN74LV175ADR Flip Flops applications.
- Bounce elimination switch
- Cold spare funcion
- Computing
- Automotive
- Clock pulse
- Power down protection
- Bus hold
- Divide a clock signal by 2 or 4
- Computers
- Supports Live Insertion
