SN74LV123ADGVRG4 Overview
There is a TFSOP enclosure with the programmable timer. To mount this digital timer with Surface Mount. The minimum operating temperature of the chip must not be lower than -40°C. It's best to use the timer clock when the temperature is below 85°C. The timer clock contains 16 pins. The digital timer's operating supply voltage is rated 5V voltage. The supply voltage of the programmable timer can rate 2.5V. You can read the timer clock's additional feature in the follwing: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS. The sum of the IC chip pins is 16 . The number of the chip's terminations sums up to 16. The timer clock has 41.900595mg in weight. The minimum supply voltage of the chip must not be lower than 2V. The supply voltage of this chip should not exceed 5.5V. The timer clock runs quiescent current at 20μA.
SN74LV123ADGVRG4 Features
Max Operating temperature at -40°C
Additional Feature: EDGE TRIGGERED FROM ACTIVE-HIGH OR ACTIVE-LOW GATED LOGIC INPUTS
Quiescent Current at 20μA
SN74LV123ADGVRG4 Applications
There are a lot of Texas Instruments
SN74LV123ADGVRG4 Programmable Timers & Oscillators applications.
- Intruder Detection
- Tamper Detection
- Home Automation Sensors
- Thermostats
- Consumer Electronics
- Remote Sensors
- White Goods
- Electric Vehicles
- Always On Systems
- Clutch Actuator circuit
