SN74LS590DRG4 Overview
In the 16-SOIC (0.154, 3.90mm Width)package, it is supplied. In order to configure it, it uses 16terminations. As a result of the supply voltage of 0, 5Vcan operate in a fully flexible manner. There are wires connecting 1elements. The total number of component pins is 16. Packaging is based on Tape & Reel (TR). To connect the circuit's other components, there are 16pins. Using [0], it can be mounted. In this case, it appears as a member of the family [0]. Due to its membership in the 74LSseries, it is suitable for a variety of applications. In this case, the logic type is set to [0]. 0°C~70°Cshould be set as the operating temperature. In this case, it is mounted with a Surface Mounttype. In the case of a supply voltage of [0], it operates more reliably. The array contains elements that store 8bits each. It is possible for the result to be noin Pbfree code. It is important to note that in regards to this electronic device, TCO OUTPUT; REGISTERED OUTPUTSis an extremely significant feature. Among its base part number [0], you will find additional parts that are related. In order to pack the product, TAPE AND REELis employed. From the voltage source, there is 5Vvoltage. In the case of the supply voltage (Vsup), it can be as low as 4.75V. 35MHzis the frequency of operation. There is 5.25V maximum supply voltage (Vsup) allowed.
SN74LS590DRG4 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT; REGISTERED OUTPUTS
Frequency of 35MHz
SN74LS590DRG4 Applications
There are a lot of Texas Instruments
SN74LS590DRG4 Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- Signal gating
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
- Clocks
