SN74LS299NE4 Overview
PDIP is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 20. A Rail/Tube case is used to pack it. The part operates at 5V voltage. It is equipped with a pin count of 20. It is recommended that the mount should be done by Through Hole. There is an electronic component in the LS. It is noted that this chip uses an operating supply voltage of 5V. The following additional aspects of this section are worth noting: HOLD MODE; COMMON I/O PINS. In the device, there are 10 input lines that are available for use. Devices with voltage delivery capabilities of 5V are available. A total of 8 bits are present on the IC chip. It has a total of zero pins. At temperatures below 70°C, it is recommended for use. Ideally, it should not fall below 0°C. A voltage of 5.25V is employed as the supply voltage. There is a voltage applied to the supply that is greater than 4.75V. An electronic device such as this one has 1 circuits in it.
SN74LS299NE4 Features
With 20 pins
Operate supply voltage at 5V
It supplies 5V power
SN74LS299NE4 Applications
There are a lot of Texas Instruments
SN74LS299NE4 Shift Registers applications.
- Data Processors
- Pseudo Random Pattern Generator
- Pulse Extenders
- Pattern Recognizers
- Interconnectors
- Counter
- Data manipulation
- Delay Line
- Generate time delay toward digital circuits
- Parallel data
