SN74LS279ANSR Overview
The package in which it is embedded is named 16-SOIC (0.209, 5.30mm Width). The package is in the form of Cut Tape (CT). Standard is the output configured for it. This electrical device has Logic type S-R Latch. This electronic part is mounted in the way of Surface Mount. A 4.75V~5.25V supply voltage is required to operate it. A temperature of 0°C~70°C is used for operation. There are a number of FPGAs in this series, including this one. With this electronic part, there are 2 bits. This device has 16 terminations. It belongs to 74LS279 family. With the supply voltage set at 5V, it is able to operate. It has 16 pins that makes it easy to use. In the world of electronics, this electronic device belongs to the family of LS. With the design of the board, there are only 16 pins. Mounting this electronic component follows the Surface Mount method. The system is powered by 5V sources. There are 2 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. This device is well suited for TR based on its reliable performance. As the output current is 8mA, the design flexibility is maximum. High efficiency requires a voltage supply of 5V. A binary equivalent of the input line is generated by the 1 output lines. It consumes 3.8mA of quiescent current without being affected by external factors. 4 circuits are used to provide this superior level of flexibility. There are also characteristics of WITH DUAL S INPUT FOR TWO FUNCTIONS associated with it.
SN74LS279ANSR Features
16-SOIC (0.209, 5.30mm Width) package
74LS series
2 Bits
74LS279 family
16 pin count
16 pins
5V power supplies
SN74LS279ANSR Applications
There are a lot of Texas Instruments SN74LS279ANSR Latches applications.
- Shift Registers
- Automotive HEV/EV Powertrain
- Buffer/Storage Registers
- Parallel-to-Serial Data Conversion
- Hammer
- Decade counting
- Meter applications
- Lamp and Display (LED)
- Shift left register
- Bus system register with enable parallel lines at bus side
