SN74LS174DG4 Overview
In the form of SOIC, it has been packaged. T flip flop uses TTLas its output configuration. A total of 1elements are contained within it. The number of terminations is 16. An input voltage of 5Vpowers the D latch. In this case, the D flip flop belongs to the LSfamily. There is an electronic component mounted in the way of Surface Mount. 16pins are included in its design. This device's clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. In order for the device to operate, it requires 5V power supplies. In order to achieve high efficiency, the supply voltage should be maintained at 5V. In this case, the high level output current is set to -400μA. 8mAis set as the low level output current. There should be a temperature below 70°Cduring operation. In order for the system to operate properly, the temperature should be higher than 0°C. The RS flip flop is designed to operate with a minimal supply voltage of 4.75VV. There is a maximum voltage support of 5.25V. A frequency of 40MHzcan be achieved. D FLIP-FLOPis the logic IC it uses. There are 1 functions available on this T flip flop. A total of 16 pins are present on this device. Its output current of 8mA allows for maximum design flexibility.
SN74LS174DG4 Features
16 pins
5V power supplies
1 Functions
16 pin count
SN74LS174DG4 Applications
There are a lot of Texas Instruments
SN74LS174DG4 Flip Flops applications.
- Counters
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
