SN74LS174D Overview
The flip flop is packaged in 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A 4.75V~5.25Vsupply voltage is required for it to operate. It is operating at a temperature of 0°C~70°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74LS series. A frequency of 40MHzshould not be exceeded by its output. A total of 1 elements are present. T flip flop consumes 26mA quiescent energy. It has been determined that there have been 16 terminations. The 74LS174 family contains this object. The power supply voltage is 5V. A device of this type belongs to the family of LS. In this case, the electronic component is mounted in the way of Surface Mount. A total of 16pins are provided on this board. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. Flip flops designed with 6bits are used in this part. Despite its superior flexibility, it relies on 7 circuits to achieve it. It runs on 5Vvolts of power. Optimal efficiency requires a supply voltage of 5V. Its output current of 8mAallows for maximum design flexibility. The number of input lines is 2. It is reported that there are 6 channels.
SN74LS174D Features
Tube package
74LS series
16 pins
6 Bits
5V power supplies
SN74LS174D Applications
There are a lot of Texas Instruments SN74LS174D Flip Flops applications.
- Single Down Count-Control Line
- ESD performance
- Shift Registers
- Storage Registers
- Computing
- Data transfer
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Convert a momentary switch to a toggle switch
- Circuit Design
