SN74HCT574DWG4 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tubepackage. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at a temperature of -40°C~85°C TA. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. You should not exceed 40MHzin its output frequency. There are 1 elements in it. It consumes 8μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. JK flip flop belongs to 74HCT574 family. A voltage of 5V is used to power it. JK flip flop input capacitance is 3pF farads. It belongs to the family of electronic devices known as HCT. The electronic part is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. There is a clock edge trigger type of Positive Edgeon this device. The part is included in FF/Latches. The flip flop is designed with 8bits. Using 8 circuits, it is highly flexible. The D latch runs on a voltage of 5V volts. The flip flop has 2ports embedded within it. If high efficiency is desired, the supply voltage should be kept at 5V. BROADSIDE VERSION OF 374is also one of its characteristics.
SN74HCT574DWG4 Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT574DWG4 Applications
There are a lot of Texas Instruments SN74HCT574DWG4 Flip Flops applications.
- Event Detectors
- Latch
- Digital electronics systems
- Circuit Design
- Balanced 24 mA output drivers
- Storage Registers
- Bounce elimination switch
- Computing
- Patented noise
- Count Modes
