SN74HCT374NSR Overview
20-SOIC (0.209, 5.30mm Width)is the packaging method. The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. A voltage of 4.5V~5.5Vis used as the supply voltage. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74HCTseries of FPGAs. It should not exceed 40MHzin its output frequency. In total, it contains 1 elements. As a result, it consumes 8μA quiescent current and is not affected by external forces. The number of terminations is 20. You can search similar parts based on 74HCT374. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. It is a member of the HCTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. It is designed with 20 pins. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. An electronic part with 8bits has been designed. Its superior flexibility is attributed to its use of 8 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. The power supply is 5V. The D flip flop is embedded with 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The number of input lines is 3.
SN74HCT374NSR Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
SN74HCT374NSR Applications
There are a lot of Texas Instruments SN74HCT374NSR Flip Flops applications.
- CMOS Process
- Dynamic threshold performance
- Patented noise
- Communications
- ESCC
- Guaranteed simultaneous switching noise level
- Buffer registers
- ESD performance
- Synchronous counter
- Latch
