Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74HCT138NSRG4

SN74HCT138NSRG4

SN74HCT138NSRG4

Texas Instruments

16 Terminations 16 Pin Signal switch 1 Functions Min 4.5V V Max 5.5V V

SOT-23

SN74HCT138NSRG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case SOP
Number of Pins 16
Weight 200.686274mg
PackagingTape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureTWO ACTIVE-LOW AND ONE ACTIVE-HIGH ENABLE INPUTS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Pin Count16
Operating Supply Voltage5V
Number of Elements 1
Polarity Inverting
Power Supplies5V
Temperature GradeINDUSTRIAL
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Load Capacitance50pF
Propagation Delay45 ns
Quiescent Current80μA
Turn On Delay Time45 ns
Family HCT
Logic Function Decoder, Demultiplexer
Supply Type Single
Bandwidth 28MHz
Logic IC Type OTHER DECODER/DRIVER
Max I(ol) 0.004 A
High Level Output Current-4mA
Low Level Output Current4mA
Number of Input Lines 3
Number of Output Lines 8
Input Conditioning STANDARD
Height Seated (Max) 2mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:4693 items

SN74HCT138NSRG4 Product Details

SN74HCT138NSRG4 Overview


Providing this information in the SOP enables digital switch board space to be saved.The package is in the form of Tape and Reel.There is a design for terminating 16 as part of its basic configuration.The multiplexer's system works with 5V voltage.In this turn signal switch, there are 16 component pins.Conductors terminate at GULL WING in this design.The supply type of this multiplexer ic is Single.This multiplexer ic is configured with 16 pins.It is positioned in the direction of Surface Mount.In the HCT family, the logic switch is included.Normally, 5V is powered by a battery.In the absence of external influences, it consumes 80μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.To accept voltage levels, the multiplexers have3 input lines.A signal source is provided by 8 output lines.85°C is an acceptable maximum temperature for this signal switch.A temperature of the multiplexer of -40°C should be maintained for minimal operation.Based on the device specifications, the signal switches is designed to operate at 5.5V maximum supply voltage.A minimum supply voltage of 4.5V is specified for the digital swith by its applicable specification.In addition, TWO ACTIVE-LOW AND ONE ACTIVE-HIGH ENABLE INPUTS exhibits improved characteristics.The mux switch configuration consists of 1 elements.It uses IC OTHER DECODER/DRIVER for its logic.

SN74HCT138NSRG4 Features


Supplied in the SOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
3 input lines
8 output lines
TWO ACTIVE-LOW AND ONE ACTIVE-HIGH ENABLE INPUTS
OTHER DECODER/DRIVER as the logic IC


SN74HCT138NSRG4 Applications


There are a lot of Texas Instruments
SN74HCT138NSRG4 Signal Switches / Multiplexers / Decoders applications.


  • Time division multiplexing system
  • Frequency multiplexing system
  • A/D converters
  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission

Get Subscriber

Enter Your Email Address, Get the Latest News