SN74HC595PWRG4 Overview
The device is embedded in 16-TSSOP (0.173, 4.40mm Width) package. It sums up to 16 where the chip's terminations add up. The Tape & Reel (TR) case contains it. The part operates at 5V voltage. In this device, there are 16 pins. Using Surface Mount as a mount point is recommended. In the HC/UH series, the electronic component belongs. Its mounting method is Surface Mount. There is a temperature range of -40°C~85°C. It is supplied with voltage within 2V~6V. This electrical component belongs to the 74HC series. If you use the 74HC595 family, you can find parts that are similar. It's noted that the chip's operating supply voltage is in the range 5V. This section has the following additional features: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. For this part, Vsup should not be less than 2V. In this device, there are 1 input lines. A voltage of 2/6V is possible with this device. Ideally, the maximum supply voltage (Vsup) should not exceed 6V. A total of 9 output lines need to be operated. Packaging is in the form of TR.
SN74HC595PWRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595PWRG4 Applications
There are a lot of Texas Instruments SN74HC595PWRG4 Shift Registers applications.
- Dual-rank shift, hold, and bus applications
- Remote control holding register
- Sequence generator
- Flash Memory
- LED matrix control
- Remote control holding register
- 8-bit data storage
- Parallel data
- ROM Chips
- Serial-to-parallel data conversion
