SN74HC595PWRE4 Overview
16-TSSOP (0.173, 4.40mm Width) is a package containing the embedded device. The number of the chip's terminations sums up to 16. There is a Tape & Reel (TR) case containing it. 5V is the part's operating supply voltage. It is equipped with a pin count of 16. Mounting by Surface Mount is recommended. In this case, the electronic component belongs to the HC/UH. As you can see, this component is mounted in the way of Surface Mount. A temperature range of -40°C~85°C is used for the operating environment. During operation, the voltage is within the range of 2V~6V. This electrical component belongs to the 74HC series. Search for similar parts based on the 74HC595 family. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; UNREGISTERED SERIAL SHIFT RIGHT OUTPUT. The minimum supply voltage (Vsup) for this part should not be less than 2V. A device with 1 input lines is available. The device is capable of delivering voltage at 2/6V. This part requires a maximum supply voltage (Vsup) of 6V. There are 9 output lines to operate. Packaging is in the form of TR.
SN74HC595PWRE4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC595PWRE4 Applications
There are a lot of Texas Instruments SN74HC595PWRE4 Shift Registers applications.
- Pattern Recognizers
- Counter
- Serial-to-parallel data conversion
- Sequence generator
- LED matrix control
- store data in digital form
- Data manipulation
- Pulse Extenders
- Output expansion
- Remote control holding register
