SN74HC594DWRG4 Overview
The device is embedded in 16-SOIC (0.295, 7.50mm Width) package. It sums up to 16 where the chip's terminations add up. It is packed in a case number Tape & Reel (TR). 5V is the part's operating supply voltage. 16 pins are provided on the device. It is recommended to mount by Surface Mount in order to get the best results. An electronic component is included in the HC/UH. The component is positioned in the way of Surface Mount. There is a temperature range of -40°C~85°C. There is a votage of 2V~6V provided with it. This electrical component belongs to the 74HC series. Based on the 74HC594 family, you can search for similar parts. It is noted that this chip uses an operating supply voltage of 5V. Please take note of the following additional aspects of this section: PARALLEL OUTPUT IS REGISTERED; ASYNCHRONOUS CLEAR FOR STORAGE REGISTER. The minimum supply voltage (Vsup) for this part should not be less than 2V. In the device, there are 1 input lines that are available for use. A voltage of 2/6V can be delivered by it. It is recommended that the maximum supply voltage for this part is not greater than 6V (Vsup). 9 output lines are available for operation. TR is the packaging way for the part.
SN74HC594DWRG4 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC594 family
Operate supply voltage at 5V
It supplies 2/6V power
With 9 output lines
Packing Method : TR
SN74HC594DWRG4 Applications
There are a lot of Texas Instruments SN74HC594DWRG4 Shift Registers applications.
- Serial to parallel converter
- LED matrix control
- Serial-to-parallel data conversion
- ROM Chips
- Data Processors
- Serial-to-parallel data conversion
- Pseudo Random Pattern Generator
- Interconnectors
- Output expansion
- temporary data storage
