Name: SN74HC4066N
Brand: Texas Instruments
SKU: SN74HC4066N
Price: 0.60000 USD
Availability: InStock

new-10%

SN74HC4066N

Manufacturer part number:SN74HC4066N

Manufacturer:Texas Instruments

Description:31ns, 34ns SPST - NO 30Ohm Typ DUAL Analog Switches MAKE-BEFORE-BREAK 74HC4066 14 Pins 100nA 4.5V 14-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:SN74HC4066N Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	14-DIP (0.300, 7.62mm)
Number of Pins	14
Weight	927.99329mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	30Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Number of Functions	4
Supply Voltage	4.5V
Base Part Number	74HC4066
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	5V
Polarity	Non-Inverting
Number of Channels	4
Max Supply Voltage	6V
Min Supply Voltage	2V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Propagation Delay	15 ns
Turn On Delay Time	38 ns
Supply Type	Single
Bandwidth	30MHz
Turn-Off Delay Time	43 ns
On-State Resistance (Max)	30Ohm Typ
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	42 dB
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	0.5pF 9pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	31ns, 34ns
Crosstalk	-45dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Voltage - Supply, Single (V+)	2V~6V
Drain to Source Resistance	30Ohm
Normal Position	NO
Height	5.08mm
Length	19.3mm
Width	6.35mm
Thickness	3.9mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74HC4066N Product Details

SN74HC4066N Overview

Due to its 14-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. Mounted in Through Hole is this multiplexer. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. Total terminations are 14. A high-quality output is provided by the electrical component's 4 channels. A 4.5V voltage supply should turn on and run the electronic component. The electronic part body is injected with 14 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Search with 74HC4066 if you are looking for analog multiplexer variants. This digital multiplexer has 30Ohm internal resistance. The functions of 14 pins can be found in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. Multiplexers should not be powered above 6V in normal situations. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. An operating current of 2μA would be sufficient for this switch device. The voltage required by this switch device is 2V~6V, draining from a single voltage supply. When the digital multiplexer is charged above 2μA, damage can occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. 5V operating voltages are supported by the electronic component. There are various bandwidths available for data transfer. The Drain to Source resistance of this electronic component is 30Ohm.