SN74HC4066DBRE4 Overview
As the electronic part is packed in SSOP, international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Tape and Reel. Total terminations are 14. The electronic part provides high-quality output because it has 1 channels. Powered by a 4.5V voltage supply, the electrical part should be switched on and run. The electrical component body receives 14 pins. An switch multiplexer with 30Ohm internal resistance has a value of 30Ohm. Datasheets for 14 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. The lowest voltage the electronic part should receive is 2V. An operating current of 2μA would be sufficient for this switch device. When the digital multiplexer is charged above 2μA, damage can occur. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating the 4 inputs requires 4 inputs. There are 30MHz bandwidths for data transfer. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer.
SN74HC4066DBRE4 Features
1 Channels
2μA Supply Current
Bandwidth: 30MHz
SN74HC4066DBRE4 Applications
There are a lot of Texas Instruments
SN74HC4066DBRE4 Analog Switches & Multiplexers ICs applications.
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
