SN74HC4060N Overview
This is a device supplied in the 16-DIP (0.300, 7.62mm) package. There are 16terminations used for configuring it. The supply voltage of 5V permits it to operate with full flexibility. There are 1 terminations on the device. There are a total of 16 pins in all components. As a result, it is packaged as Tube. As part of the circuit, there are 16pins used to connect other components. It is mounted in the direction of [0]. The HC/UHfamily is derived from it. Having been designed as a member of the 74HCseries, it is well suited for use in a wide range of applications. Binary Counteris selected as the logic type. In this case, the operating temperature should be set to -40°C~85°C. Having a mounting type of [0], it is suitable for installation. By providing the supply voltage of [0], it is capable of operating more reliably. The array stores 14bits in each element. There are more related parts under the 74HC4060base part number. In this case, there is 2/6V voltage coming from the voltage source. The device operates on a supply voltage of [0]. There is 2V minimum supply voltage (Vsup) for this device. With a frequency of [0], it operates. It is possible to reach a maximum supply voltage of 6VV (Vsup).
SN74HC4060N Features
Embedded in the 16-DIP (0.300, 7.62mm) package
14 bits per element
Operating supply voltage of 5V
Frequency of 53MHz
SN74HC4060N Applications
There are a lot of Texas Instruments
SN74HC4060N Counters & Dividers applications.
- Frequency dividing circuits
- Time delay circuits
- Communications Digital Frequency Synthesizers;
- VHF, UHF, FM, AM, etc.
- Fixed or Programmable Frequency Division
- Time Out Timer for Consumer-Application Industrial Controls
- Timing applications
- Clocks
- Up Counters
- Dual Up Counters
