SN74HC373PWE4 Overview
In the package TSSOP, it can be found. A Rail/Tube package is used to package it. An electronic part with 8 bits is designed. A device such as this has 20 terminations designed. In order to operate it, the supply voltage must be 5V. 20 pins are included. This electronic device is categorized as a HC/UH electronic device. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. Optimal efficiency requires 5V as the supply voltage. The superior flexibility of the system is achieved through its use of 8 circuits. In the low level output current, the value is set to 7.8mA. In the high level output current, the value is set to -7.8mA. It is recommended that the operating temperature not exceed 85°C. Temperatures above -40°C should be used. The supply voltage is limited to 6V. A minimal voltage of 2V is needed to operate it. There is a logic IC BUS DRIVER used in the system. It features maximum flexibility in design due to 7.8mA output current.
SN74HC373PWE4 Features
TSSOP package
8 Bits
20 pin count
20 pins
SN74HC373PWE4 Applications
There are a lot of Texas Instruments
SN74HC373PWE4 Latches applications.
- Motor Drives
- PCs and Notebooks
- Hammer
- Parallel data storage
- Digital bus buffer
- Flip-flops
- Parallel data synchronization
- Parallel data storage
- Shift register
- Pattern generators
