SN74HC273PW Overview
The item is packaged in 20-TSSOP (0.173, 4.40mm Width)cases. As part of the package Tube, it is embedded. As configured, the output uses Non-Inverted. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74HCseries of FPGAs. A frequency of 36MHzshould be the maximum output frequency. In total, it contains 1 elements. Terminations are 20. The object belongs to the 74HC273 family. The power source is powered by 5V. The input capacitance of this JK flip flopis 3pF farads. A device of this type belongs to the family of HC/UH. There is an electronic part that is mounted in the way of Surface Mount. This board has 20 pins. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. An electronic part designed with 8bits is used in this application. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 5.2mA . Currently, there are 2 input lines present. There is 8μA quiescent current consumption by it. Additionally, it is characterized by DUMMY VAL. There are 8 channels available.
SN74HC273PW Features
Tube package
74HC series
20 pins
8 Bits
SN74HC273PW Applications
There are a lot of Texas Instruments SN74HC273PW Flip Flops applications.
- EMI reduction circuitry
- Shift registers
- Latch
- Individual Asynchronous Resets
- Common Clocks
- Dynamic threshold performance
- Latch-up performance
- Bus hold
- Frequency division
- Counters
