SN74HC166AIPWRQ1 Overview
There is a 16-TSSOP (0.173, 4.40mm Width) package embedded with the device. Chip terminations add up to 16. A Tape & Reel (TR) case holds it. 5V is the part's operating supply voltage. Devices with 16 pins are available. Using Surface Mount as a mount point is recommended. In this case, the electronic component belongs to the HC/UH. Mounting of this component is indicated by Surface Mount. -40°C~85°C is the range of operating temperatures for the device. Votage is supplied within 2V~6V. In this case, the electrical component belongs to the series Automotive, AEC-Q100, 74HC. If you use the 74HC166 family, you can find parts that are similar. A range of 5V is noted as the operating supply voltage of this chip. The following additional aspects of this section are worth noting: CLOCK INHIBIT. There should be no less than 2V supply voltage (Vsup) for this part. In the device, there are 9 input lines that are available for use. The device is capable of delivering voltage at 2/6V. This part requires a maximum supply voltage (Vsup) of 6V. A 1 output is present on the part.
SN74HC166AIPWRQ1 Features
With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
SN74HC166AIPWRQ1 Applications
There are a lot of Texas Instruments SN74HC166AIPWRQ1 Shift Registers applications.
- Remote control holding register
- data transfer
- Serial-to-parallel data conversion
- Serial-to-parallel data conversion
- Data manipulation
- Pseudo Random Pattern Generator
- 8-bit data storage
- Remote control holding register
- Data Format Converters
- Data Processors
