SN74HC164PWR Overview
14-TSSOP (0.173, 4.40mm Width) is the package in which the device is embedded. Chip terminations add up to 14. Cut Tape (CT) is the case in which it is packed. 5V is the part's operating supply voltage. This part has 1 elements. 14 pins are present on the device. Using Surface Mount as a mount point is recommended. Electronic components belong to the HC/UH group. The component is positioned in the way of Surface Mount. Operating temperatures are within the range of -40°C~125°C. Votage is supplied within 2V~6V. The 74HC series contains this electrical component. Similar parts can be found using the 74HC164 family. According to the specification, this chip's operating supply voltage falls within the range of 5V. Please take note of the following additional aspects of this section: AND-GATED SERIAL INPUTS (A AND B). There should be no less than 2V supply voltage (Vsup) for this part. In the device, there are 2 input lines. It should not exceed 6V in terms of the supply voltage (Vsup). A total of 8 bits are present on an IC chip. There is TR packaging for this part. There is 36MHz frequency set on the device. It is equipped with 8 outputs.
SN74HC164PWR Features
With 14 pins
Mounted in Surface Mount type.
Based on 74HC164 family
Operate supply voltage at 5V
Packing Method : TR
SN74HC164PWR Applications
There are a lot of Texas Instruments SN74HC164PWR Shift Registers applications.
- Serial-to-parallel data conversion
- Delay Line
- Parallel data
- Counter
- Output expansion
- Serial to parallel converter
- Parallel to serial converter
- Sequence generator
- Data Processors
- Data manipulation
