SN74CBTS6800DBR Overview
It is included in the 24-SSOP (0.209, 5.30mm Width) in order to save board space.The package is packaged in the manner of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.Since they are members of the 74CBTS series, they can be used in a wide variety of applications.As parts of its basic configuration, 24 terminations are desgined.There is a base part number of 74CBTS6800 which can also be used in order to locate the logic switch that are related to this item.The multiplexer is supplied with 5V voltage.A component pin count of 24 is found on this turn signal switch.It employs GULL WING as the point at which conductors come to an end.This supply type employs Single.A configuration of 24 pins is used.The mount is in Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 10 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.During mux switch's normal operation, 5V is provided with a power supply.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Without the influence of external factors, it consumes 3μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The signal switching operates with a resistance of 2.With a resistance of 7Ohm, it operates.
SN74CBTS6800DBR Features
Supplied in the 24-SSOP (0.209, 5.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
SN74CBTS6800DBR Applications
There are a lot of Texas Instruments SN74CBTS6800DBR Signal Switches / Multiplexers / Decoders applications.
- Microprocessor memory systems
- RF-based home automation system
- Night vision cameras
- LVDS
- Enabling block of memory depending on address in memory chips
- Data communication
- Analog, digital or video signal switching
- VGA
- Automatic Monitoring systems
- Robotic vehicles
