Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBTR16861DLG4

SN74CBTR16861DLG4

SN74CBTR16861DLG4

Texas Instruments

48 Terminations4.5V~5.5V 48 Pin 74CBTR16861 Signal switch74CBTR Series 2 Functions

SOT-23

SN74CBTR16861DLG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 48-BSSOP (0.295, 7.50mm Width)
Number of Pins 48
Operating Temperature-40°C~85°C
PackagingTube
Series 74CBTR
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 48
Type Bus Switch
Resistance 50Ohm
Subcategory Bus Driver/Transceivers
Technology CMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 5V
Terminal Pitch0.635mm
[email protected] Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74CBTR16861
Pin Count48
Qualification StatusNot Qualified
Circuit 10 x 1:1
Supply Voltage-Max (Vsup) 5.5V
Power Supplies5V
Supply Voltage-Min (Vsup) 4V
Number of Ports2
Output Current64mA
Number of Bits 10
Propagation Delay1.25 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current64mA
Low Level Output Current15mA
Voltage Supply SourceSingle Supply
Independent Circuits 2
Length 15.875mm
Width 7.49mm
RoHS StatusROHS3 Compliant
In-Stock:3019 items

SN74CBTR16861DLG4 Product Details

SN74CBTR16861DLG4 Overview


Digital switch is provided in the 48-BSSOP (0.295, 7.50mm Width) for the purpose of saving board space.The package is packaged in accordance with Tube.Surface Mount is the mounting method digital switch ic uses.Bus Switch is the analog IC that the multiplexers uses.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.As a member of 74CBTR series, the multiplexers can be used for a wide range of applications.The basic configuration includes 48 terminations.The base part number is 74CBTR16861, so you can find its logic switch related parts using that number.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 48 is found on this turn signal switch.As a result, GULL WING represents the end of the conductors.This supply type employs Single.With 48 pins, it is configured.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is a member of the CBT/FST/QS/5C/B family.In the signal multiplexer, there are 10 bits available.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.Keeping Vsup at 5.5V will prevent some unnecessary failures.The power supply of 5V is provided for mux switch's normal operation.This is an the digital switch ic that is classified as Bus Driver/Transceivers.The resistance is 2.The resistance of the signal switching is 50Ohm.For higher switches' flexibility, 64mA is provided as an output current.

SN74CBTR16861DLG4 Features


Supplied in the 48-BSSOP (0.295, 7.50mm Width) package
Adopting a supply type of Single
Power supplies of 5V

SN74CBTR16861DLG4 Applications


There are a lot of Texas Instruments SN74CBTR16861DLG4 Signal Switches / Multiplexers / Decoders applications.

  • Make half adder
  • LVDS
  • A/D converters
  • Paper plants
  • Logic gates for other digital devices
  • Analog, digital or video signal switching
  • Steel plants
  • HD surveillance system
  • Microprocessor instruction decoding
  • Enabling different rows of memory depending on address in memory chips

Get Subscriber

Enter Your Email Address, Get the Latest News