Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBTLV3257DG4

SN74CBTLV3257DG4

SN74CBTLV3257DG4

Texas Instruments

16 Terminations 16 Pin Signal switch 2 Outputs 4 Functions Min 2.3V V Max 3.6V V

SOT-23

SN74CBTLV3257DG4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case SOIC
Number of Pins 16
Weight 141.690917mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 16
Resistance 40Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Subcategory Other Logic ICs
Technology CMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 4
Supply Voltage 2.5V
Pin Count16
Number of Outputs 2
Power Supplies2.5/3.3V
Temperature GradeINDUSTRIAL
Max Supply Voltage3.6V
Min Supply Voltage2.3V
Operating Supply Current 10μA
Number of Bits 4
Propagation Delay250 ps
Quiescent Current10μA
Turn On Delay Time6.1 ns
Family CBTLV/3B
Logic Function Demultiplexer, Multiplexer
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 200MHz
Output Polarity TRUE
Logic IC Type MULTIPLEXER AND DEMUX/DECODER
High Level Output Current-128mA
Low Level Output Current128mA
Independent Circuits 1
Height 1.58mm
Length 9.9mm
Width 3.91mm
Radiation HardeningNo
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:4872 items

SN74CBTLV3257DG4 Product Details

SN74CBTLV3257DG4 Overview


Due to the fact that it is provided in the SOIC, digital switch allows the board to be compacted.It is designed with 16 terminations as part of its basic configuration.For multiplexer's system, a voltage of 2.5V is supplied.This turn signal switch consists of 16 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.A configuration of 16 pins is used.The mounting point is Surface Mount.I would like to refer to the logic switch as a member of the CBTLV/3B family.As a result, signal multiplexer provides a total of 4 bits.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.This turn signal switch has 2 outputs designed for its operation.This is an the digital switch ic that is classified as Other Logic ICs.Without external influences, it consumes 10μA current of multiplexer ic.The resistance of the signal switching is 40Ohm.Signal switch operation at 85°C temperature is acceptable.It is recommended that the minimal operating temperature of the multiplexer be maintained at -40°C.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 3.6V.Device specifications require that the minimum supply voltage is 2.3V.It uses the logic IC MULTIPLEXER AND DEMUX/DECODER as its core logic unit.It is possible to maintain stability of the multiplexers when the load receives a supply voltage of 10μA.

SN74CBTLV3257DG4 Features


Supplied in the SOIC package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
MULTIPLEXER AND DEMUX/DECODER as the logic IC
Operating with the supply current of 10μA


SN74CBTLV3257DG4 Applications


There are a lot of Texas Instruments
SN74CBTLV3257DG4 Signal Switches / Multiplexers / Decoders applications.


  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission
  • Combinational circuit
  • Logic gates for other digital devices
  • Signal router

Get Subscriber

Enter Your Email Address, Get the Latest News