Welcome to Hotenda.com Online Store!

logo
userjoin
Home

SN74CBTD3306PWE4

SN74CBTD3306PWE4

SN74CBTD3306PWE4

Texas Instruments

8 Terminations 8 Pin Signal switch 2 Functions Min 4.5V V Max 5.5V V

SOT-23

SN74CBTD3306PWE4 Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Package / Case TSSOP
Number of Pins 8
Weight 39.008944mg
PackagingRail/Tube
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Resistance 7Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature85°C
Min Operating Temperature -40°C
Additional FeatureBUS SWITCH
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 5V
Terminal Pitch0.65mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count8
Qualification StatusNot Qualified
Operating Supply Voltage5V
Power Supplies5V
Temperature GradeINDUSTRIAL
Number of Channels 2
Max Supply Voltage5.5V
Min Supply Voltage4.5V
Load Capacitance50pF
Number of Ports2
Nominal Supply Current1.5mA
Current - Output 64mA
Number of Bits 1
Propagation Delay250 ps
Quiescent Current1.5mA
Turn On Delay Time5.4 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Bandwidth 20MHz
Output Polarity TRUE
Logic IC Type BUS DRIVER
High Level Output Current-128mA
Low Level Output Current128mA
Length 4.4mm
RoHS StatusRoHS Compliant
Lead Free Lead Free
In-Stock:2092 items

SN74CBTD3306PWE4 Product Details

SN74CBTD3306PWE4 Overview


It is included in the TSSOP in order to save board space.As a result, it is packaged in the way of Rail/Tube.Among its basic features are 8 terminations.The multiplexer's system is powered by 5V volts.A component pin count of 8 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.There are 8 pins on it.The mount is in Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.As a result, signal multiplexer provides 1 bits.In order for 5V to operate normally, a power supply is provided.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.A resistance of 2 governs its operation.A resistance of 7Ohm is used to operate the signal switching.Transmission is carried out over 2 channels in the turn signal switch's circuit.Signal switchs at temperatures up to 85°C are acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.A minimum supply voltage of 4.5V is required to operate the digital swith.Furthermore, the characteristics of BUS SWITCH have been improved.BUS DRIVER is the logic integrated circuit used in the digitalswitch.

SN74CBTD3306PWE4 Features


Supplied in the TSSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS SWITCH
BUS DRIVER as the logic IC


SN74CBTD3306PWE4 Applications


There are a lot of Texas Instruments
SN74CBTD3306PWE4 Signal Switches / Multiplexers / Decoders applications.


  • A/D converters
  • D/A converters
  • Implementing boolean functions with multiple variables
  • Data collection system
  • Audio transmission
  • Video transmission
  • Image transmission
  • Recording transmission
  • Combinational circuit
  • Logic gates for other digital devices

Get Subscriber

Enter Your Email Address, Get the Latest News