SN74CBTD16210DLG4 Overview
It is included in the SSOP in order to save board space.Among its basic features are 48 terminations.The multiplexer's system is powered by 5V volts.A component pin count of 48 can be found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.In this case, Single is employed as the supply type.There are 48 pins on it.The mount is in Surface Mount.Among the family of CBT/FST/QS/5C/B the logic switch is a member.As a result, signal multiplexer provides 20 bits.In order for 5V to operate normally, a power supply is provided.Without the influence of external factors, it consumes 1.5mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.A resistance of 2 governs its operation.A resistance of 7Ohm is used to operate the signal switching.Signal switchs at temperatures up to 85°C are acceptable.It is recommended that the minimum operating temperature of the multiplexer be kept at -40°C.The relevant device specification specifies a maximum supply voltage of 5.5V for the signal switches.A minimum supply voltage of 4.5V is required to operate the digital swith.BUS DRIVER is the logic integrated circuit used in the digitalswitch.
SN74CBTD16210DLG4 Features
Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
BUS DRIVER as the logic IC
SN74CBTD16210DLG4 Applications
There are a lot of Texas Instruments
SN74CBTD16210DLG4 Signal Switches / Multiplexers / Decoders applications.
- A/D converters
- D/A converters
- Implementing boolean functions with multiple variables
- Data collection system
- Audio transmission
- Video transmission
- Image transmission
- Recording transmission
- Combinational circuit
- Logic gates for other digital devices
