Name: SN74CBT3383CDBRE4
Brand: Texas Instruments
SKU: SN74CBT3383CDBRE4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	24-SSOP (0.209, 5.30mm Width)
Number of Pins	24
Weight	172.39345mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
Type	Bus FET Exchange Switch
Resistance	8Ohm
Subcategory	Other Logic ICs
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	5
Supply Voltage	5V
Terminal Pitch	0.65mm
Base Part Number	74CBT3383
Pin Count	24
Circuit	5 x 2:2
Supply Voltage-Max (Vsup)	5.5V
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	4
Output Current	64mA
Number of Bits	10
Propagation Delay	150 ps
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	1
Height Seated (Max)	2mm
Length	8.2mm
Width	5.3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT3383CDBRE4 Product Details

SN74CBT3383CDBRE4 Overview

Due to the fact that it is provided in the 24-SSOP (0.209, 5.30mm Width), digital switch allows the board to be compacted.The package is packaged in the manner of Tape & Reel (TR).As far as mounting is concerned, digital switch ic uses Surface Mount.The multiplexers uses an analog IC Bus FET Exchange Switch as the analog part of the circuit.By keeping the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4.5V~5.5V voltage.The multiplexers can be used for a wide range of applications since they are members of 74CBT series.Its basic configuration includes terminations in the 24 range.As its base part number is 74CBT3383, logic switch can also be used to find its related parts.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch consists of 24 component pins.Conductors terminate at GULL WING in this design.There is a type of supply of Single.A total of 24 pins are configured on this board.The mounting point is Surface Mount.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides a total of 10 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.I would classify the digital switch ic as an electronic part belonging to the Other Logic ICs category.With a resistance of 0, it operates.It operates with a resistance of 8Ohm.64mA provides a high degree of switches' flexibility.