Name: SN74CBT3126DGVRE4
Brand: Texas Instruments
SKU: SN74CBT3126DGVRE4
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TFSOP (0.173, 4.40mm Width)
Number of Pins	14
Weight	41.787197mg
Operating Temperature	-40°C~85°C
Packaging	Tape & Reel (TR)
Series	74CBT
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
Type	Bus Switch
Resistance	7Ohm
Subcategory	Bus Driver/Transceivers
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Number of Functions	1
Supply Voltage	5V
Base Part Number	74CBT3126
Pin Count	14
Operating Supply Voltage	5V
Circuit	1 x 1:1
Power Supplies	5V
Supply Voltage-Min (Vsup)	4V
Number of Ports	2
Output Current	64mA
Number of Bits	4
Propagation Delay	250 ps
Family	CBT/FST/QS/5C/B
Output Characteristics	3-STATE
Supply Type	Single
Output Polarity	TRUE
High Level Output Current	-128mA
Low Level Output Current	128mA
Voltage Supply Source	Single Supply
Independent Circuits	4
Height Seated (Max)	1.2mm
Width	3.6mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

SN74CBT3126DGVRE4 Product Details

SN74CBT3126DGVRE4 Overview

This is a relatively small item of digital switch that is included in the 14-TFSOP (0.173, 4.40mm Width) in order to save space on the board.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 4.5V~5.5V supply voltage, which gives it a lot of flexibility.With the 74CBT series, the multiplexers are suitable for a diverse range of applications.Among its basic configurations are 14 terminations.The base part number is 74CBT3126, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 5V.multiplexer's systemCurrently, this turn signal switch has a total of 14 component pins.A conductor terminates at GULL WING.Single is used as its supply type.A configuration of 14 pins is used.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch object belongs to the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 4 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.This is an the digital switch ic that is classified as Bus Driver/Transceivers.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A resistance of 2 is used to operate the signal switching.A resistance of 7Ohm is used to operate the signal switching.For higher switches' flexibility, 64mA is provided as an output current.