SN74CB3T3125DGVR Overview
In order to conserve board space, digital switch is included in the 14-TFSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses IC Bus Switch as the analog IC.In the case of -40°C~85°C, turn signal switch will not be affected by external factors.A supply voltage of 2.3V~3.6V provides digital controlled switch's superior flexibility for designers.As a member of 74CB series, the multiplexers can be used for a wide range of applications.Among its basic configurations are 14 terminations.The base part number is 74CB3T3125, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemIn this turn signal switch, there are 14 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.The board has 14 pins configured.Multiplexer ics are mounted in the direction of Surface Mount.The logic switch is included into the family of CB3T/3VT.Signal multiplexer consists of 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 2.3V so that unnecessary failures can be prevented.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.During mux switch's normal operation, 2.5/3.3V is provided with a power supply.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 20μA current of multiplexer ic.The switches packaging is based on TR.With a resistance of 0, it operates.A resistance of 8Ohm is used to operate the signal switching.In mux switch configuration, there are 4 elements.The output current of 64mA is provided for higher switches' flexibility.
SN74CB3T3125DGVR Features
Supplied in the 14-TFSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 2.5/3.3V
SN74CB3T3125DGVR Applications
There are a lot of Texas Instruments SN74CB3T3125DGVR Signal Switches / Multiplexers / Decoders applications.
- Control unit of Central Processing unit (CPU)
- Enabling block of memory depending on address in memory chips
- HDMI applications
- PCIe
- Image transmission
- Used to connect a single source to multiple destinations
- Time division multiplexing system
- To select different task for memory in microprocessor memory systems
- Logic gates for other digital devices
- Analog to digital conversion
