SN74CB3Q3384APWR Overview
As a means of saving space, digital switch is provided in the 24-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) is the method used for packaging.Digital switch ic uses a Surface Mount mounting method.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -40°C~85°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 2.3V~3.6V, designers are provided with a greater degree of flexibility.As a member of 74CB series, the multiplexers can be used for a wide range of applications.The basic configuration includes 24 terminations.There is a base part number of 74CB3Q3384 which can also be used in order to locate the logic switch that are related to this item.In this case, 2.5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 24 component pins.A conductor terminates at GULL WING.In this case, Single is employed as the supply type.This multiplexer ic is configured with 24 pins.Surface Mount is the way it is mounted.The multiplexer ic provides 10 bits.Vsup (maximum supply voltage) should be kept as 3.6V to prevent unnecessary failures.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Not being affected by the external factors, consumes 2mA current of multiplexer ic.According to TR, the switches is packaged.The resistance of the signal switching is 2.9Ohm is the resistance at which it operates.In addition, it provides improved characteristics compared to ALSO OPERATES WITH 3.3V SUPPLY.For increased switches' flexibility, the output current of 30mA is provided.
SN74CB3Q3384APWR Features
Supplied in the 24-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
ALSO OPERATES WITH 3.3V SUPPLY
SN74CB3Q3384APWR Applications
There are a lot of Texas Instruments SN74CB3Q3384APWR Signal Switches / Multiplexers / Decoders applications.
- Arithmetic Logic Units
- To select different devices in microprocessor output
- Image transmission
- Home automation system
- To select different devices in microprocessor input
- Enabling block of memory depending on address in memory chips
- Data distribution
- CNC machines
- Data bus control
- VGA
